Cruciform section - cfs

This is a section frequently adopted for the modelling an I section with two T sections connected symmetrically on its web forming a cross section with flanges.

Materials and Dimensions

Two different materials (steel) can be defined.

The required dimensions are as follows:

• I Section Web Height. The default value is 0.2 m
• I Section Web Thickness. The default value is 0.02 m
• I Section Flange Width. The default value is 0.2 m
• I Section Flange Thickness. The default value is 0.02 m
• T Section Web Height. The default value is 0.2 m
• T Section Web Thickness. The default value is 0.02 m
• T Section Flange Width. The default value is 0.2 m
• T Section Flange Thickness. The default value is 0.02 m